Equipment

It is able to achieve a rate of efficiency 8-15 times to the one of conventional three-dimensional rotary vibration barrel.

It can achieve de-burring, polishing, and washing.
High-precision milling can prevent damages and deformation.

It has the functions of timing, automatic operation, manual sand blasting, and calling, etc. Each unit has 2 sets of spray guns available for single or linked operation. Easy feeding and movement of the workpieces. The cyclone design can increase the efficiency of sandblasting.

It is installed with solvent heating and an automatic thermostat which covers a temperature control range from room temperature to 120℃, and it has a cleaning capacity with a power of 1200W.

It can adjust the rotational speed, and control the heating from room temperature up to 150 ℃ for speeding up the drying process and improve efficiency.

The air is heated in a circulation way to allow more average and accurate temperature distribution within the dryer.

Trimos V7 two-dimensional height gauge
Physical 2D measurement
High repeatability, high efficiency and real-time

It is able to measure up to 99 types of sizes at a time without designating the positioning.

It has the function of aligning the workpieces to avoid potential contradictions.

It has an automatic measuring function and can integrate the capabilities of OMM and CMM.

It has the automatic measurement and additional three-dimensional measuring functions.

High level of precision which is able to measure a range as minimum as 0.001um. The low level of grams of pressuring can fully avoid damage caused by the measuring.

適合複雜曲面、幾何形狀、自由形狀等高精度掃描量測。

E=1.7+3.3L/1000 μm- P=1.7 μm